Methacrylate Desiccators

These desiccators are the perfect chamber to purge your BHO in, resulting in one of the purest oil extracts and one of the most beautiful, known as shatter. It's used to dry the oil up and remove any oil residues.

When making BHO extract, you’ll want to purge your oil in a vacuum chamber in order to completely eliminate any butane residue gas. You’ll need a desiccator or vacuum chamber in order to do this, and if you need to you can also use drying materials in the chamber in order to dry it out even further.

Shatter is best made extremely hard, and the harder the better when it comes to quality shatter extracts.

The top part of the chamber has a valve in order to let the air back in slowly; if this is done too fast you can end up ruining your hard work and getting the chamber quite dirty.

Availble in 150mm, 200mm, and 250mm.

These chambers are implosion-proof and can withstand a -740 mm/Hg vacuum, losing less than 20mm/Hg over 24h.

Contents:

• Polycarbonate lid
• Lower part made of polypropylene
• 24mm sieve plate
• Gas outlet valve