Cli-Mate Mini-Grower (humidity)

Control your grow’s parameters with the Cli-Mate Mini-Grower, now including humidity; up until now we had the model that controls temperature, but now you can get your hands on this beauty that controls humidity as well as other devices in your grow.

You’ll be able to time 4 600w lights with just one timer that’s built in to the controller itself. This timer won’t give you any electrical issues nor will it mess with your lights – your plants will be completely safe.

You’ll be able to connect an extractor and intractor in order to control both temperature and humidity. Depending on how hot/cold the air that’s being intracted is, as well as its level of humidity, the controller will try and find the best setting to give your grow the best parameters possible. You can set the minimum and maximum speed so that your extractor is never off, avoiding any telling odors from getting out and possibly ruining any discretion your grow might have had.

It also has a hysteresis setting, allowing you to set the max and minimum degrees you want the temperature to fluctuate between. If you want the temperature at 25º and you set the hysteresis to 2º, it’ll go up to 27º and down to 23º maximum. You can also plug a heater into this device, and if the temperature gets too low at night it’ll turn on and maintain a stable temperature.

In order for all measurements taken to be accurate, you’ll need to place the sensor near the tips of the plants. If there are any issues such as a short circuiting of the extractors, a fuse will go in the device, protecting your grow – if the issue happens with the lights, the thermal shielding inside the device will also ensure your grow is safe.

If you’re looking to have total control over your grow, you’ll definitely need one of these Cli-Mate temperature, humidity and light controllers.