Cli-Mate Trafo Controller

We've always had controllers that turn extractors on or off, and others that adjusted the speed of the fans. With the power-adjusting ones, we had to set a minimum power of 50% with the dimmer to prevent them from making too much noise, since they require minimum power to work properly

With the Cli-Mate Trafo, you'll be able to set a temperature and the controller itself will raise or lower the power as needed to increase or decrease the temperature. Unlike many other controllers, this one comes with a frequency converter that will reduce the extractor’s speed while providing enough power to avoid noise problems.

With its 5m long sensor it can measure the room’s temperature. It’s perfect for large spaces where you can place the sensor in the middle of the grow and the controller on a wall. You'll have a more silent operation while providing your plants with the best environment possible.

It can automatically switch to any of the 5 different speeds it comes with, we can’t choose it. Cli-Mate Trafo will choose the most appropriate speed to stabilize the parameters. If it’s too hot and we have air conditioning, it will reduce the power until the room cools down to the set temperature. If there’s no air conditioning and you take cold air from the exterior, as is normal with indoor crops during the winter, the controller will reduce the power to prevent the grow from getting too cold and will increase it when it gets too warm. That way, it constantly stabilizes the temperature, avoiding fungi and stress.

We can connect extractors of up to 2.5A avoiding fuse shortage and other kinds of problems, as not all controllers are suitable for large extractors. It's important to know the current intensity of your extractor to prevent problems. Besides, its safety systems will make sure the fuse goes out before burning your device.

• Cli-Mate Trafo’s specifications:
• 230v
• 50-60Hz.
• 2.5A.
• 5M long sensor.
• 5 speeds.
• Replaceable fuses.
• Adjustable from 11ºC to 45ºC.