Twin Controller by Cli-Mate

Twin Controller by Cli-Mate is one of the most efficient and easy to use temperature controlling devices, all you have to do is input the temperature you desire and it will regulate the temperature through air filtration.

You can connect an intractor and an extractor to the device, and thanks to the wheels on the bottom you can also regulate the speed, which is helpful in making your extractors less noisy, therefore calling less attention from your neighbors.

You can also regulate the negative pressure, which will guarantee a perfect balance between the speed of intraction and extraction. This means that you won’t be taking in more air than the extractor can release, so your anti-odor filter will work absolutely perfectly.

It also includes a gauge that measures the temperature and controls the velocity of your extractors, so all you have to do is select the temperature on the central wheel. Once you’re able to renew the air in your grow area, you’ll be able to completely control the temperature and avoid your plants suffering any kind of stress.

If, on the other hand, you live in an isolated area with nobody around, then the noise your extractors make won’t be a problem. Thanks to the two upper plugs, you’ll be able to have your devices at full potential, allowing your air filtration system to filter the most amount of air possible in and out.

You’ll need two outlets for both plugs. It also has two input jacks, to which you need to connect your extractors. It’s important to note that you should plug the intraction device into the plug that says Inlet, and the extraction device in the plug that says outlet, or else it won’t work.

You’ll also need a timer, because although the device can measure temperature, you’ll still need a timer to turn the extractors off.

Characteristics:

• Dimensions: 19 x 13.5 x 85cm
• Weight: 2.2kg
• Voltage: 220/230V - 50Hz
• Maximum power: 12AMP+12AMP=24AMP