Cobra Ray Dripper + 1m microtube

Cobra Ray Dripper comes with an axis to which the micro-tube is attached so that you can go around the plant without pulling from the watering pipes. Very easy to install, all we have to do is punch a hole with a punch and introduce the micro-tube inside (press-fit). 

We'll set the spike in our pot and all will have to do is open or close the water valve so that our plants are watered automatically. You can join the 16mm pipe directly to the water supply network or do a DYW watering project with a small water tank, a pump, 16mm pipe and as many Cobra Ray drippers as you need.

They can water up to 18L per hour which is ideal for large pots which is usually the case of mother plants or when we grow in coco and we water very often. In this way, irrigation will be completed much earlier and our plants can be hydrated in a matter of seconds.

You can complement your watering system with an irrigation timer which will take charge of opening or closing the water valve according to our needs.

Remember not to flood the substrate in excess. It is always preferable to irrigate in several short periods than in a single but very abundant one.