6 and 10 mm flexible water hose

Flexible water hose made of black plastic for drip irrigation. Available in 25m rolls so that you can reach all your plants with your irrigation system. It is a prime quality hose that will drive water (or nutrient solution) to your plants.

It allows for an easy installation of drippers and diffusers. There are numerous components and fittings such as connectors, adapters and elbows along with special pieces for drip irrigation that match these diameters. These hoses will help you create the irrigation circuit you need to supply nutrients to your plants.

You can cut it to the exact length you want and install connectors, Tee and Y pieces, drippers, pumps, shut-off valves, timers, water tanks, programers, filters and end-plugs to create your customized automatic irrigation system. It is ideal for hydroponics and aeroponics.

Don't forget to close the end of the pipe with an end-plug so that all the drippers and diffusers are kept at a similar pressure (as similar as possible, at least).

Remember it is difficult to work with water and electricity at the same time. Therefore, we recommend consulting any doubt with a professional before designing the irrigation and electrical layouts of your indoor crop. For greater safety, keep all cables at the upper part of your installation, above the growlights and away from tanks, pipes and drains.

It is advisable to check the system and all connexions frequently to avoid potential accidents and losses.