Jack Puck Press by Trimpro
About this product
Jack Puck by Trimpro is a press used to make hash slabs, or any other type of resin or powder slabs with a pressure power of 2 – 8 metric tons.
Quantity:
Sent from
Add to wish list
More product information
Jack Puck by Trimpro is a press that has been specially designed to make 100g hash slabs, although you can use it with any other kind of resin or powder. It’s manual, and it can apply from 2-8 tons of pressure (depending on the model you pick) so that your slabs turn out perfectly compact.
It’s extremely easy to use; once attached to your work surface, all you have to do is put some flexible, transparent plastic into the mold, and then introduce the material you want to press, making sure to have weighed it beforehand so your slab is exactly the weight that you want. Then close it, securing the lid with the two wing nuts and begin moving the lever repeatedly until it can no longer be tightened and voila, your slab is done. To remove the slab, you have to switch the press’s direction, twisting the valve counter-clockwise until it’s freed up, undo the wing nuts on the lid and then replace the wing nuts without the lid. Turn the valve again so that the press pushes upwards. Begin moving the lever again and your slab will be pushed outwards. Once it’s out, change direction with the valve again and push the mold out. Your Jack Puck press by Trimpro is ready to use once again!
The Jack Puck press was made with top quality materials, capable of putting up with prolonged use without breaking.
We don’t keep this product in stock, so you’ll have to order it by demand which should take between 48 – 72h to arrive.
Small Round Jack Puck 2 Tons:
- Measurements: 11.4 x 11.4 x 29.2cm
- Mold measurements: 3.17cm
- Mold Height: 6.35cm
- Total weight: 5.9kg
Big Round Jack Puck 2 Tons:
- Measurements: 11.4 x 11.4 x 29.2cm
- Mold measurements: 7cm
- Mold Height: 6.35cm
- Total weight: 6.4kg
Square Jack Puck 2 Tons:
- Measurements: 11.4 x 11.4 x 29.2cm
- Mold measurements: 5,4 x 5,4cm
- Mold height: 6.96cm
- Total weight: 6.4kg
Round Jack Puck 8 Tons:
- Measurements: 15.2 x 16.5 x 43.2cm
- Mold measurements: 11.7cm
- Mold height: 9.52cm
- Total weight: 21.4kg
Square Jack Puck 8 Tons:
- Measurements: 17.8 x 20.3 x 37.5cm
- Mold measurements: 11.7cm
- Mold height: 6.35cm
- Total weight: 21.4kg
Grade Comments (0)